Before you run Digital Performer with High Sierra, be sure to download and install Version 9.52 at the link above (or later versions when they become available at motu.com/download). High Sierra operation requires DP 9.52 or higher. The v9.52 read me is here.
Driver For Mac Os High Sierra
Current versions of all MOTU software products and hardware drivers available at motu.com/download (latest versions) appear to be compatible with High Sierra, although final compatibility testing is still on-going.
If you are installing MOTU hardware drivers on your High Sierra system for the first time, please read this tech note for important information about enabling the driver in your system's security settings. This procedure is not necessary if the driver has already been installed in your High Sierra system and you are merely updating it.
If you own one of the pro audio models listed below, be sure to download and install the very latest shipping drivers. You must install these latest drivers before you can use your MOTU product listed below with High Sierra.
If you own one of the USB-equipped MOTU audio or MIDI interfaces listed below, be sure to download and install the very latest shipping drivers. You must install these latest drivers before you can use your MOTU product listed below with High Sierra.
Please have the driver team look into this and create a fix. Currently I am unable to use my printer from any apple device running this operating system, the printer has always been setup as a network TCP/IP printer and never had any issues till upgrading to the High Sierra 10.13.x operating system. The drivers posted online from Dell say they are compatible with Apple Mac OS 10.13 but that isn't the case currently. Thanks!
My GF has an older MacBook on 10.6.2 so I tried installing the drivers on her system and everything worked flawlessly. So what I did was grab the Dell and PPDs folders from /Library/Printers on her computer and transferred them over to my computer. I then reset the Printer System and did a normal install procedure, and everything seems to work, as far as the wireless printing goes. I haven't yet tested the scanner wirelessly yet.
Thank you for the reply! I ended up deleting all the /Library/Printers files on my machine and copied the exact same folder from my wife's Macbook Air over to my system and retried the install. It noticed some error upon the printer install but it was able to self correct and I can now print from the Macbook. So thank you for the suggestion it appears to be working well enough for printing which is all I needed. I wish Dell would release correct drivers for future versions of the Mac o.s. so I don't have to do these workarounds. I appreciate you helping out!
macOS 10.13/10.14/10.15/11.4 has implemented an additional security layer for kernel extension drivers, such as the Line 6 audio drivers. After the Line 6 device is connected, the customer must open the Security Control Pane and accept the Line 6 driver in order for the device to be recognized.
However, sometimes the driver gets blocked and the message won't appear. Your driver and hardware simply won't work. In either case, you'd need to approve the driver in System Preferences > Security & Privacy:
Kernel Extensions in backtrace: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000->0xffffff7f86441fff dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000 com.apple.nvidia.driver.NVDAResman(10.2.2)[31F1CA86-E625-320E-A6DC-46FF7FC3943B]@0xffffff7f8646a000->0xffffff7f86750fff dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000 dependency: com.apple.iokit.IONDRVSupport(516.28)[3EA927A7-90EC-356A-A07E-B7E4246E5C40]@0xffffff7f8644e000 dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000 dependency: com.apple.AppleGraphicsDeviceControl(3.15.26)[DD390B93-7A57-3981-B709-CE0EE9127B5C]@0xffffff7f8645e000 com.apple.iokit.IOAcceleratorFamily2(348.5)[D748F500-65D8-30C4-AA70-2D245E7851C9]@0xffffff7f86827000->0xffffff7f868b8fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[441A112D-E54F-3B2C-82A9-9FE928BBE7F9]@0xffffff7f86812000 dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000 dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000 com.apple.GeForce(10.2.2)[0D8C53A6-A9AC-3DB9-8DA0-FF9477799500]@0xffffff7f868c8000->0xffffff7f86962fff dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000 dependency: com.apple.iokit.IONDRVSupport(516.28)[3EA927A7-90EC-356A-A07E-B7E4246E5C40]@0xffffff7f8644e000 dependency: com.apple.nvidia.driver.NVDAResman(10.2.2)[31F1CA86-E625-320E-A6DC-46FF7FC3943B]@0xffffff7f8646a000 dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000 dependency: com.apple.iokit.IOAcceleratorFamily2(348.5)[D748F500-65D8-30C4-AA70-2D245E7851C9]@0xffffff7f86827000
if I change inside new kext applegraphiccontrol kext/contents/plugin this file: AppleGraphicsDevicePolicy.kext with an old and patched 10.12.5 one...I have two monitors working and nvidiaweb drivers loaded fine
Followed the same instructions, the web driver loads the frame buffer and shows as GTX 1080, but no graphics acceleration. Can set 165Hz on the monitor, but no transparency/QE/CI. I believe the shift to Metal for the GUI on 10.13 means we'll need new drivers from nVidia to take advantage. Waiting patiently!
I tried this -nvidia-web-driver-updates-for-macos-high-sierra-update-06052017/page-2?do=findComment&comment=2439371but it did not work. I tried to replace the kexts using these files -nvidia-web-driver-updates-for-macos-high-sierra-update-06052017/?do=findComment&comment=2437874 but when I give boot I get A disconnected cable message on the monitor, but the pc does not restart. I can only enter the system if I use nv_disable = 1
So, for this work properly, after a clean uninstall and install Quadro & GeForce MacOS Driver Release we should not install the latest driver CUDA 9.0.222 driver for Mac and instead install the older CUDA 9.0.214 driver for Mac. Is that correct?
Do you have a Fiery controller or one of the other controller options for the 252? The Fiery seems to be the most common controller and driver support for that model ended way before macOS 10.13. The last drivers for your Docucolor were for macOS 10.7 (Lion). If you do have a Fiery then you'll need to use the Fiery Express driver (direct link below) which gives basic functionality. For anything beyond basic finishing options you'll have to configure that to print to the hold queue and use Command Workstation to finish setting up the job. You also won't be able to use the latest version of Command Workstation. I think that it will work with version 5.8 but I know that it will work with version 5.3.
I looked at the Compatibility Document for High Sierra, and it looks like there is only one version of the DC252 family that has the High Sierra driver - the front end of Xerox FreeFlow DXP260. However, I do not see the driver option from the pull downs with that front end selected. I would recommend contacting Support: 1-800-821-2797
Note: These drivers are only required if you need serial port emulation for Bluetooth Low Energy or Ethernet/WiFi connectionson OSX. Bluetooth Classic serial port emulation is available as part of the operating system and telnet/web usage is available directly without these drivers. See the instructions here: -console.com/solution/articles/5000713729-using-airconsole-with-macos-sierra-10-12- for alternate connection methods on macOS
3. You will receive a popup from the operating system during the install procedure saying that "System Extension Blocked" - this is normal on macOS 10.13 and you will need to grant explicit permission to install the Airconsole kext driver. The operating system gives you 30 minutes to do this.
j5create display connectivity has been limited on macOS High Sierra 10.13.4, 10.13.5 and 10.13.6. This is solved from macOS Mojave 10.14 onward with our latest driver that can be downloaded here. We recommend updating your macOS to restore multi-display support.
Tried to add the Cannor PIXMA iP4600 printer to my Mac in Printer>Settings. It found the printer connected via USB but claimed that I must contact CANNON for a driver. But Cannot site only has driver for 10.9 Mavericks. All other operating systems give the error -
The PIXMA iP4600 is not compatible with the Macintosh High Sierra operating system but as a work around the older drivers may function in the High Sierra environment with some limitations which are currently unknown to Canon. The 10.9 drivers are available, you may download them HERE . 2ff7e9595c
Comments